Protection for Your Safety

Wilgard® protective guard rail systems are painted safety yellow and provide a highly visible physical barrier that guards expensive equipment, shields key work areas, and helps define traffic patterns in your plant or facility.

Customers report that our Wilgard guard rail is the best available and Wildeck has the data to back that up. Tests confirm that properly installed Wilgard guard rail will absorb severe impacts from forklifts or other equipment...up to a 13,000 lb. load impact at 4 mph, without failure.

Wilgard Guard Rail systems can be ordered in single, double or triple rail design. Column centers are identical for Standard and Lift-Out Guard Rails. All guard rail components include necessary hardware and anchors.

In addition to the protective features of Wilgard Standard Guard Rails, Lift-Out Guard Rails allow for the easy removal of rail sections for convenient access to machinery or equipment for servicing, cleaning or repairing. Lift-Out Guard Rails slip into a specially designed "saddle", which is bolted to a post to retain structural integrity.

Protection for Your Investment Machine / Safety Guards Safeguard expensive machinery and employees from lift truck impacts with highly-visible Wildeck machine/safety guard rails. Built to last, these safety guards are constructed from a 5" x 5" x 3/16" steel tube welded to a 9" x 9" x 3/8" base plate. Assembled as a complete "U" shaped unit, these rugged guards can be bolted to the surface or secured in concrete for maximum safety.

• Are tested, trusted and TOUGH. Proven to provide a safer, more efficient work environment.
  
  

  Guarding Products Protect:
  Computer Stations Facility Personnel Manufacturing and Office Areas Machinery and Equipment End-of-Aisle Rack and Shelving Dock Loading/Unloading Areas Freight and Pedestrian Doors	Storage Modules Stacked or Palletized Inventory Material Lifts(VRCs) Pedestrian Walkways Vehicle Traffic Areas Mezzanine Column and Stairs Facility Drainpipe Electrical Cabie

  
  

Guarding

WILGARD GUARD RAIL

• Strong corrugated 11 gauge steel rail, approximately 12” wide (top to bottom)
• Available in stock lengths from 2’ to 10’ (measured center-of-column to center-of-column)
• Custom rail lengths available
• Columns constructed of 5” x 5” x 3/16” structural tubing
• Available in 18” high or 44” high to support single-rail, double-rail, or triple-rail guard rail
• Hefty 12” x 12” x 3/4” thick base plates
• Withstands a 13,000 lb load impact at 4 miles per hour
• Pedestrian Pass-Thru Gate incorporates easily into new or existing runs of guard rail

RACK PROTECTORS

• ‘Right’ or ‘Left’ Rack Protectors available from stock
• Standard lengths of 26”, 36”, 42”, and 48” meet the majority of warehouse requirements
• Custom Rack Protectors also available
• 48” Extension Angle for longer spans. Can be field cut

SPECIALTY PRODUCTS

A. Rack Upright Protectors
B. Column Protectors

C. Machine/Safety Guards
D. Bollards